0.45 Micron Water Filter: Compatible with Medivators Advantage; DSD-Edge; DSD-201; DSD-91E; SSD-102
MRF08 is a compatible filter for OEM Part MF01-0015.
0.45 Micron water filter is located outside the AER and its change is pressure related. Water pressure should be 40 psi or above. Always keep one on hand. Change at least every 3 months even if pressure remains above 40 psi.
Instructions for installing the 0.45 Micron water filter:
1. The filters in the Pre-filter housing should be changed at least every three months.
2. The filter wrench is only for removing the filter housings. NEVER tighten the filter housings with a filter wrench.
3. A thin film of silicone grease applied to the O-ring will aid in both sealing of the housing and ease of removal at the time of the next filter change.
*The above is adapted from Medivators guides.
Medivators®, Advantage Plus®, and CER Optima® are registered trademarks of Medivators Inc. MedService Repair is not affiliated with Medivators and any and all references to Medivators® on this website are intended to be for informational purposes only. The products on this site have not been manufactured or approved by Medivators®.