0.2 Micron Bacteria-Retentive Water Filter MF01-0013

mrf05_2_micron_bacteria_filter

Product Code: MRF05

MFG Product ID : MF01-0013

( Each )



Specifications

Advantage, DSD-Edge, DSD-91E, DSD201, SSD-102

0.2 Micron Bacteria-Retentive Water Filter: Compatible with Medivators Advantage; DSD-Edge; DSD-201; DSD-91E; SSD-102

 

MRF05 is a compatible filter for OEM Part MF01-0013.

0.2 Micron Bacteria-Retentive water filter is located inside the AER cabinet between the alcohol and detergent. It needs to be changed every 6 months or sooner if poor water conditions exist. Always keep one on hand. Water line disinfection must be performed when changing this filter.

 

Instructions for installing the 0.2 Micron Bacteria-Retentive water filter:

1. The disinfector must be in idle state to perform this procedure.

2. Close the incoming water supply valve to the disinfector.

3. Drain excess water from the filter housing: Place a container under the water filter inlet tube; Disconnect the water filter inlet quick-connect from incoming water supply line; Connect the accessory hose to the water filter inlet tube; Open the filter bleeder valve and drain the water from the filter canister.

4. Remove the water filter cartridge: Loosen the internal filter and remove the water filter housing; Rotate the filter counterclockwise to unlock the filter cartridge; Remove the filter and discard in accordance with institution guidelines.

5. Install the new water filter cartridge: Insert the filter cartridge into the housing cap; Turn the filter cartridge clockwise until the tabs locks into the cap.

6. Wipe the filter housing clean with a lint-free cloth.

7. Install the filter housing onto the housing cap: Apply an NSF-approved silicone lubricant to the housing o-ring to aid assembly and sealing; Tighten the housing into the cap by hand. Do not overtighten.

8. Reconnect the water inlet line.

9. Close the bleeder valve on the filter housing.

10. Turn on the water supply and check for leaks.

11. Bleed any air from the housing using the bleeder valve.

12. Perform the Water Line Disinfect procedure.

*The above is adapted from Medivators guides.

 

Medivators®, Advantage Plus®, and CER Optima® are registered trademarks of Medivators Inc. MedService Repair is not affiliated with Medivators and any and all references to Medivators® on this website are intended to be for informational purposes only. The products on this site have not been manufactured or approved by Medivators®.

MedService Repair is your #1 source for OEM compatible AER filters at the lowest possible prices. We have years of experience with AER filters! We’ve been servicing and repairing AERs for decades which gives us firsthand knowledge of what works and what doesn’t. That knowledge becomes your advantage as we’ve spent a great deal of time considering the water filters and maintenance products we offer our clients and use ourselves repairing and maintaining AERs for medical offices throughout the United States. By creating a free account today you’ll have access to our member only special pricing on AER filters and many other parts and service items to keep your endoscope reprocessor in excellent working condition.

For years, buying the manufacturer’s OEM AER filters was the only logical solution as they were the highest quality parts. This was the was case for all the most popular AER brands; Medivators AER Filters, Cantel AER Filters, ASP AER Filters, Johnson & Johnson AER Filters, Olympus AER Filters, Custom Ultrasonics AER Filters, Steris AER Filters.

And while OEM quality has not suffered, today other options exist. Manufacturer compatible AER filters are available from reputable sources you can trust at highly discounted prices. The savings available is instrumental to running medical practices efficiently especially when the quality of the AER replacement and maintenance parts themselves meets or exceeds the manufacturer’s own high quality water filters.

The manufacturing processes of AER filters have evolved considerably over the years. Automation and technology advances in the manufacturing processes play a large role in this. For instance, the quality of the side seam welding has improved dramatically with new equipment that has helped these competing AER filter manufacturers meet or exceed the OEM manufacturer’s own strict guidelines. The glues and additives that used to be used and were a source of common issues have been replaced with ultrasonic thermal welding which completely ensured the integrity of the seams.

All this to say that if you haven’t considered aftermarket OEM compatible AER Filters as the solution for your medical practice’s consumable maintenance items you may want to consider it. If you have any questions at all about AER Filters, please call us today at the number below. We’ll be happy to answer any questions and make recommendations.